Driver Board for 2D MEMS

Driver Board for 2D MEMS Chip

The Driver Board provides the necessary drive circuitry for the 2D MEMS Chip and Header, allowing the user to control four analog voltages between 0 and 60V that actuate the MEMS mirror. The required power supply for the driver PCB is 3.3V/5V. The 26-pin connector on its back side is designed for connecting to the Raspberry Pi but it will work with any SPI hardware. The 6-pin connector on its front side is designed to connect to the MEMS Header with a ribbon cable.

Further details about this product are given in pdf format below.

 Spec Sheet

<<<Back to Products